How To Drain Gas From Poulan Pro Snowblower (All Models)

Poulan Pro snow blowers are a great way to keep your driveway and sidewalks clear of snow. But if your snow blower has been sitting for a while and you need to drain the gas, here’s what you need to do.

Why draining the gas out of the Poulan Pro snowblower is good before storing?

Draining the gas out of the Poulan Pro snowblower is good before storing it for next season. You can prevent its carburetor from getting gummed up and this will also extend the life of your snowblower.

Additionally, this will help to prevent any ice from forming in the snowblower’s fuel lines. Draining the gas out of your gas-powered Poulan Pro snow blower is a simple process that only takes a few minutes.

How To Drain Gas From Poulan Pro Snowblower

Method # 1 – Let it Run Until Fuel Tank Is Empty

The easiest way to drain the gasoline in your snowblower is to go ahead and start it and just let it run.

But this method is feasible and cost-effective only if you have very little gas in your fuel tank.

Eventually, the snowblower is gonna run out of gas and stop.

If you want more precision, remove your Poulan Pro snowblower carburetor to drain out residual gas from the carb too.

Method # 2 – Extract Gas From Fuel Line

It is an easy method to drain the gas out of the tank especially if you have a lot left in it.

  • In Poulan Pro snowblower engines, the gas tank has a fuel line coming directly out of its bottom.
  • There is a retaining clip on the line to tighten it.
  • Take up a pair of pliers and just remove that retaining clip or slide that down the fuel line.
  • Now go ahead and loosen up this fuel line.
  • Make sure you have something underneath to catch all the gas that’s going to drain out.
  • You can tilt your snowblower on one side to extract the remaining gas.
  • And once all the gas is drained out of your machine make sure you replace that fuel line and retaining clip.
  • Start the Poulan Pro snowblower engine and let it run. It will shut off on its own when out of gas completely.

Method # 3 – Using a Siphon Pump

If you want to drain the gas from your Poulan Pro snowblower, you can do so by using a siphon pump. This is a more quick and easy way to get the job done and you won’t have to worry about spilling gas all over the place.

Here’s how to siphon gas from the Poulan Pro snowblower

  • Make sure that your snowblower is at even level, turned off and the engine is cool.
  • Place an empty container to catch the residual gas near your snowblower.
  • Open or unscrew the fuel tank cap.
  • Take the siphon pump and place the intake tube into the gas tank.
  • Then put the other end of the tube into the container.
  • Squeeze the siphon pump with your hand until the gas tank is empty.
  • This procedure has its limitations so not all the gas from the snow blower is extracted.
  • To completely empty the gas tank, start the Poulan Pro snowblower engine and let it run. It will shut off on its own when out of gas.

Do You Need to Drain Poulan Pro Snowblower?

If you are a newbie using a Poulan Pro snowblower, you must know that it’s important to drain the gas and oil from your snowblower before storing it for the summer. This is because gas and oil can deteriorate over time, and if they’re left in the snowblower, they can cause damage to the engine and parts.

Precautions To Take Before Draining Gas From Poulan Pro Snowblower

Before you begin the process of draining the gas out of your snowblower, there are a few safety measures you should take.

  1. Make sure that the snowblower is turned off and that the engine is cool.
  2. Disconnect the spark plug wire from the spark plug. This will prevent the engine from accidentally starting while you are working on it.
  3. Make sure that the Poulan Pro snowblower is in a well-ventilated area. It will allow any fumes that are present to dissipate quickly.
  4. Wear gloves and eye protection while you are working to protect yourself from any potential injuries.
  5. Finally, make sure that you have a clean container to catch the gas as you drain it out.

Related Questions – How To Drain Gas From Poulan Pro Snowblower

How do I prepare my snowblower for winter?

As winter approaches, it’s important to make sure your snowblower is in good working order. After all, you don’t want to be stuck in the middle of a snowstorm with a broken-down machine. To help you prepare your snowblower for winter, we’ve put together a few tips.

  • First, make sure to change the oil and spark plugs. This will help ensure that your snowblower is running smoothly and efficiently.
  • Next, check the belts and blades to make sure they are in good condition. This is important because damaged blades can cause the snowblower to work less efficiently.
  • Finally, make sure the snowblower is properly lubricated. This will help protect it from the cold weather and prevent it from rusting.

By following these tips, you can help ensure that your snowblower is ready to take on the winter weather.

How do you start a Poulan Pro snowblower after summer?

It’s important to properly maintain your Poulan Pro snowblower after each season. This includes properly storing it and making sure it’s clean before you put it away.

Now that winter is approaching, it’s time to get your snowblower ready for action. There are a few things you’ll need to do to make sure your snowblower is ready to start on the first snowfall.

Check the spark plugs and clean or replace them if necessary.

Inspect the auger and the impeller to make sure they’re not damaged. If you see any damage, it’s best to replace the parts before using the snowblower.

Make sure the snowblower is properly lubricated before using it.

Leave a Comment