How To Drain Gas From Yard machines Snowblower (All Models)

Yard machines snowblowers are a great way to keep your driveway and sidewalks clear of snow. But if your snow blower has been sitting for a while and you need to drain the gas, here’s what you need to do.

Why draining the gas out of the Yard machines snowblower is good before storing?

Draining the gas out of the Yard machines snowblower is good before storing it for next season. You can prevent the carburetor from getting gummed up and it will also extend the life of the snowblower.

Additionally, this will help to prevent any ice from forming in the snowblower’s fuel lines. Draining the gas out of your gas-powered snow blower is a simple process that only takes a few minutes.

How To Drain Gas From Yard machines Snowblower

Method # 1 – Let it Run Until Fuel Tank Is Empty

The easiest way to drain the gasoline in your snowblower is to go ahead and start it and just let it run.

But this method is feasible and cost-effective only if you have very little gas in your fuel tank.

Eventually, the snowblower is gonna run out of gas and stop.

If you want more precision, remove your Yard machines snowblower carburetor to drain out residual gas from the carb too.

Method # 2 – Extract Gas From Fuel Line

It is an easy method to drain the gas out of the tank especially if you have a lot left in it.

  • In Yard machines snowblower engines, the gas tank has a fuel line coming directly out of its bottom.
  • There is a retaining clip on the line to tighten it.
  • Take up a pair of pliers and just remove that retaining clip or slide that down the fuel line.
  • Now go ahead and loosen up this fuel line.
  • Make sure you have something underneath to catch all the gas that’s going to drain out.
  • You can tilt your snowblower on one side to extract the remaining gas.
  • And once all the gas is drained out of your machine make sure you replace that fuel line and retaining clip.
  • Start the Yard machines snowblower engine and let it run. It will shut off on its own when out of gas completely.

Method # 3 – Using a Siphon Pump

If you want to drain the gas from your Yard machines snowblower, you can do so by using a siphon pump. This is a more quick and easy way to get the job done and you won’t have to worry about spilling gas all over the place.

Here’s how to siphon gas from the Yard machines snowblower

  • Make sure that your snowblower is at even level, turned off and the engine is cool.
  • Place an empty container to catch the residual gas near your snowblower.
  • Open or unscrew the fuel tank cap.
  • Take the siphon pump and place the intake tube into the gas tank.
  • Then put the other end of the tube into the container.
  • Squeeze the siphon pump with your hand until the gas tank is empty.
  • This procedure has its limitations so not all the gas from the snow blower is extracted.
  • To completely empty the gas tank, start the Yard machines snowblower engine and let it run. It will shut off on its own when out of gas.

Do You Need to Drain Yard machines Snowblower?

If you are a newbie using a Yard machines snowblower, you must know that it’s important to drain the gas and oil from your snowblower before storing it for the summer. This is because gas and oil can deteriorate over time, and if they’re left in the snowblower, they can cause damage to the engine and parts.

Precautions To Take Before Draining Gas From Yard machines Snowblower

Before you begin the process of draining the gas out of your snowblower, there are a few safety measures you should take.

  1. Make sure that the snowblower is turned off and that the engine is cool.
  2. Disconnect the spark plug wire from the spark plug. This will prevent the engine from accidentally starting while you are working on it.
  3. Make sure that the Yard machines snowblower is in a well-ventilated area. It will allow any fumes that are present to dissipate quickly.
  4. Wear gloves and eye protection while you are working to protect yourself from any potential injuries.
  5. Finally, make sure that you have a clean container to catch the gas as you drain it out.

Related Questions – How To Drain Gas From Yard machines Snowblower

How do I prepare my Yard machines snowblower for winter?

As winter approaches, it’s important to make sure your Yard machines snowblower is in good working condition. After all, you’ll be relying on it to keep your driveway and sidewalks clear all season long. Here are a few tips on how to prepare your snowblower for winter:

Change the oil: This is one of the most important steps in preparing your snowblower for winter. Fresh oil will help keep your engine running smoothly all season long.

Sharpen the blades: Sharp blades are essential for a snowblower that works well. Be sure to sharpen the blades before the first snowfall.

Inspect the auger: The auger is the part of the snowblower that spins and throws the snow. Inspect the auger and make sure it’s in good working condition.

Test Yard machines Snowblower: Once you’ve done all of the above, it’s time to test out your snowblower. Make sure everything is working properly before the first snowfall.

How do you start a snowblower after summer?

It is important to properly maintain your snowblower after each season to ensure it is in good working condition when you need it. At the end of each winter, you should clean the snowblower and perform any necessary maintenance tasks.

This will help to prevent rust and other damage that can occur over the summer months.

When autumn comes around and the first snowfall is on the horizon, you’ll want to get your snowblower out of storage and make sure it is ready to go. Starting a snowblower after it has been in storage for a while can be a bit tricky, but with these tips, you’ll be able to get it up and running in no time.

Tips to start a snowblower after summer:

  1. Check the oil level and add more if needed.
  2. Clean out the fuel tank and add fresh fuel.
  3. Check all of the bolts and screws to make sure they are tight.
  4. Inspect the auger and paddles for any damage or wear.
  5. Make sure the spark plug is clean and in good condition.
  6. Start the snowblower and let it run for a few minutes to make sure everything is working properly.

Leave a Comment