How To Clean Honda Snowblower Carburetor. The carb is responsible for mixing the fuel and air in the right proportions and delivering it to the snowblower engine. If the carburetor of your snow thrower is not working properly, its engine will not run properly. Or maybe you will have to run your Honda snowblower on choke only.
There are a few things you can do to try to fix a snow blower carburetor.
First, you can clean the carburetor by just spraying a carb cleaner in all its openings without removing it. This is usually all that is needed to fix the issue.
If that doesn’t work, you may need to disassemble the carburetor and clean it thoroughly.
Rebuilding a carburetor is not as difficult as it may sound. You can do it yourself with a few tools and a little patience.
Keep reading for a step-by-step guide on how to clean a Honda snowblower carburetor after removing it as well as get the tips only a pro can tell. No matter how much your carburetor is gummed up, you can fix it with these simple steps.
Can you clean the Honda carburetor without removing it?
Although it is possible to clean a carburetor without removing it, it is generally not recommended. Removing the carburetor from your Honda Snowblower allows for a more thorough cleaning and inspection, and it also allows you to make any necessary repairs.
How To Clean Honda Snowblower Carburetor Thoroughly
In this step-by-step guide to cleaning the Honda snow thrower carburetor, we have divided it into 4 major sections.
- Removing the Carburetor from the snow blower
- Disassembling / Opening the Carburetor
- Cleaning the Honda Snowblower Carburetor
- Reassembling / Reinstalling
You will require the following items to rebuild the carb:
- A wrench
- High-Quality Carb Cleaner
- Dry Cotton Cloth
1. Removing the Carburetor from the Honda Snow blower
Follow these steps carefully to revive your carb and of course snow blower:
Remove the Cover
Unscrew all 6 bolts with a socket wrench and set the cover aside attached to the exhaust guard.
Remove the Fuel line
First, Turn off the fuel supply or clamp the Honda snow thrower’s fuel line with the fuel line clamp.
Now slide the clip on the fuel line up and pull the line away from the carb.
Pull Off the Primer line
Pull the primer line away from the carburetor after removing its clip.
Removing the Throttle Cable
To fully remove the carburetor, you must first remove its throttle cable. Slide the carb a little bit away from the body. Now slide the throttle inside and pop up the throttle cable to release it.
Now we are going to the next phase of disassembling our Honda Snowblower’s carburetor.
2. Disassembling Honda Snow Thrower Carburetor
Remove the Gaskets
Peel off the gaskets from both ends of the carburetor using your fingers.
Empty the Carburetor Bowl
If you don’t want any fuel in your workspace then empty the carburetor completely, before tearing it apart. Pull off the bolt(mentioned in the picture below) to drain the fuel from the carburetor bowl or its base. Collect the fuel in any empty container.
Clean the exterior of the carburetor
Spray some carb cleaner all over your Honda carburetor to clean its exterior. This way any dirt or grime on the outside will never get inside once the carburetor is opened.
Remove the Carb Bowl
Open the Carburetor bowl by removing the other bolt in the bowl. Remove any remaining fuel in it.
Release the Float
Slide the hinge pin with your fingers or pliers to remove the float. Set the pin and the float aside.
Note: Never spray carburetor cleaner on the float with the float needle on it. The float needle has a rubber seal that can be damaged by the chemicals in the carb cleaner.
Remove Main Jet
Take a flathead screwdriver and remove the main jet from the center or ‘neck’.
Remember that always use good quality flat-head screwdriver to unscrew the main jet. This is because main jet is made from soft metal and you can easily damage it with a slight wrong move.
Remove the emulsion tube
After removing the main jet, push the emulsion tube out of the ‘neck’ by inserting a flat-head screwdriver into the carb venturi.
Remove the O-ring
Finally, remove the O ring that seals the fuel bowl.
Note: Never spray carburetor cleaner on the o-rings. The o-rings are rubber seals that can be damaged by the chemicals in the carb cleaner.
3. Cleaning the Honda Snow blower Carburetor
It’s time to clean the Honda carburetor thoroughly inside out to remove any accumulated dirt or fuel residuals.
Spray each passage/opening of the carburetor
Spray in each and every big or small opening of the carburetor with a good quality carb cleaner to get rid of dirt, grime, and other residuals.
Always place a container below before spraying the carb cleaner.
Spray The Main Jet
The most important part of the Honda snowblower’s carburetor is its main jet. There is a tiny hole in it that is responsible to let the fuel go into the engine. If this got blocked the engine will run lean and creates problem in starting.
Most of the time it got clogged up or blocked, so we have to do this exercise. Spray it again and again until the hole is cleared of dirt or any blockage.
Other components of the Carb
Spray the emulsion tube, and bowl. These are the other important parts of a carburetor that must be cleaned thoroughly before they can be reassembled. Spray carb cleaner at each of these parts well enough so that the carburetor can be used for a long time again.
Use a soft brush or a toothbrush
Rub all the parts with a toothbrush or other small soft brush to further clean the carb.
Note: Don’t use a wired brush or any hard brush on the internal parts of the carburetor. It can damage them and affect the efficiency of the engine.
If you want, re-spray each part again after brushing.
Dry With A Clean Cloth
Now dry each component with a soft and clean cloth.
Reassembling the Carburetor
Set the emulsion tube
Put the emulsion tube back into its place by just sliding it with the screwdriver.
Place the Main jet
Reinstall the main jet after the emulsion tube and tighten it with the same screwdriver.
Reinstall the Float
Secure the float by inserting the hinge pin.
Put the O-ring
Reinstall the o-ring by simply pushing it with your hand on the edge of the fuel bowl.
Reassemble the fuel bowl
Place the fuel bowl onto the carb body and tighten it with the wrench.
Put the Gaskets back on
Now reattach bother gaskets on both sides of the carburetor.
Attach with the Engine
Slide the carburetor back onto the mounting bolts.
Attach Throttle Cable
To attach the throttle cable, push the throttle towards you and slide the cable into it. Now release the throttle.
Reinstall the Fuel line and Primer Line
Finally, attach the primer line and the fuel line to their place. Now you can switch on the fuel supply.
Attach the cover
Attach the cover and tighten all 6 screws to complete the cleaning.
Check Honda Snowblower Air Filter
Always remember to check that the snowblower air filter is clean before starting up its engine. This will allow clean air to enter the carburetor because dirty air from the snow thrower air filter will reverse the progress you just made.
Related Questions – How To Clean Honda Snowblower Carburetor
How do you clean a fuel tank on a Honda snowblower?
It is essential to clean the fuel tank on your Honda snowblower on a regular basis. Over time, debris and residue can build up in the tank and clog the fuel line. This can cause the snow thrower to run poorly or not at all.
When you’re ready to clean your snowblower’s fuel tank, you’ll need to gather a few supplies first. You’ll need a clean, empty container to catch the old fuel, rags or paper towels, and mild detergent. You’ll also need a funnel to pour the new fuel into the tank.
Once you have everything you need, follow these steps:
- Remove the Honda snow thrower’s gas cap and release any pressure in the fuel tank.
- Place the rags or paper towels over the fuel tank opening.
- Carefully tilt the snowblower, and pour the old gas into the container.
- Once the tank is empty, remove the rags or paper towels.
- Mix a small amount of mild detergent with water and use it to clean the inside of the fuel tank.
- Use a brush to scrub the inner side of the tank.
- Rinse the tank with clean water and dry it with a clean towel.
- Use the funnel to pour fresh fuel into the snowblower’s fuel tank.
- Replace the gas cap and start the snow blower to check for any leaks.
You can also clean the fuel tank after removing it from the Honda snow thorwer. Once it is removed, empty the tank. Now you can use a brush and soap to scrub the inside of the tank. Rinse the tank out with water and then dry it off before putting it back on the snow thrower.
What causes a Honda snowblower to stall under load?
If you’ve ever used a snowblower, you know that it can be a bit finicky. One minute they’re running smoothly and the next they’re stalling out. This can be especially frustrating when it happens under load, such as when you’re trying to clear a large amount of snow.
A snowblower may stall under load for several reasons. One common reason is that the snowblower’s engine is not getting enough fuel. This can be caused by a dirty air filter, which prevents the engine from getting enough air.
The snowblower may also be starved for air, which can happen if the snow is too deep or if the snowblower’s intake is blocked.
Another common reason is that the snowblower’s auger is not turning. This can be caused by a clogged auger, which prevents snow from being moved away from the impeller.
Finally, the problem may be with the snowblower’s engine, such as if the spark plugs are dirty or the carburetor needs to be adjusted.
Finally, the snowblower may stall if the snow is too deep for the snowblower to handle. In this case, the snowblower’s shear bolts may break, allowing the snow to enter the snowblower’s engine and cause it to stall.
Should I store my Honda snow blower with gas in it?
If you plan on storing your Honda snow blower for an extended period of time, it’s generally advisable to empty the gas tank before doing so. This will help prevent the gas from deteriorating and potentially clogging up the carburetor.
However, if you add a fuel stabilizer to the gas, you can safely store the snow blower with gas in it without any issues.
5 Best Honda Snowblowers – 2 Stage Electric Start
1. Honda HSS928AATD 9HP 28In Two Stage Snow Blower
If you live in an area that gets a lot of snow, then you know how important it is to have a good snow blower. The Honda 9HP 28In Two Stage Snow Blower is a great option for those who need a reliable and powerful snow blower.
This snow blower has a track drive system that helps it move through deep snow with ease. Moreover, it also has an electric start that makes it easy to get started in cold weather.
The Honda HSS928AATD Snow Thrower is perfect for those who want to remove snow from their driveway or sidewalk. It is easy to operate and has a variety of features that make it a great choice for those who want to make snow removal easier.
Some of the features include an electric starter, a massive 28-inch clearing width, and a track drive that make it easy to maneuver.
2. Honda HSS1332ATD 389cc 32 inches Track Drive Snow Blower
3. Honda 660820 28 In 270CC Electric Start Snow Blower
4. Honda 660780 Variable Speed Self-Propelled 24 in. 196cc Two Stage Snow Blower
5. Honda HSS724ATD 198cc Two Stage Electric Start Track Snow Blower
How To Clean Honda Snowblower Carburetor – Conclusion
That was how easy to clean the Honda Snowblower carburetor. A clean carburetor is essential for proper engine operation, and it also helps in improving fuel economy. So be sure to add Honda snow thrower’s carburetor cleaning to your regular maintenance routine at the end of the season.