How To drain gas from Polaris Snowmobile

If you own a Polaris snowmobile, then you know that they are built to last. But even the best snowmobiles need a little maintenance from time to time. One important maintenance task is to drain the gas from the tank of your machine if your going to store it.

This is especially important if you are storing your snowmobile for an extended period of time, such as at the end of the winter. Gas can go bad over time, and untreated gas can damage your snowmobile’s engine and its parts.

In this article, we will show you how to drain the gas from your Polaris snowmobile with 3 methods. We will also explain why it’s important to do this and how often you should do it.

Why draining the gas out of the Polaris Snowmobile is good before storing?

If you’re like most people, you probably don’t think too much about the gas in your snowmobile. However, it’s important to be aware of the potential problems that can occur if you don’t take care of your gas properly.

Untreated gas can lead to several problems, including bad performance, fouled spark plugs, and even engine damage.

Draining the gas out of the Polaris Snowmobile is good before storing it for next season. You can prevent the carburetor from getting gummed up and it will also extend the life of the snowmobile.

Additionally, this will help to prevent any ice from forming in the snowmobile’s fuel lines.

To avoid these problems, it’s important to empty the gas from your snowmobile regularly.

Remember that draining the gas out of your gas-powered snow blower is a simple process that only takes a few minutes.

How To Drain Gas From Polaris Snowmobile

Method # 1 – Let it Run Until Fuel Tank Is Empty

The easiest way to drain the gasoline in your snowmobile is to go ahead and start it and just let it run.

But this method is feasible and cost-effective only if you have very little gas in your fuel tank.

Eventually, the snowmobile is gonna run out of gas and stop.

If you want more precision, remove your Polaris snowmobile carburetor to drain out residual gas from the carb too.

Method # 2 – Extract Gas From Fuel Line

It is an easy method to drain the gas out of the tank especially if you have a lot left in it.

  • In Polaris snowmobile engines, the gas tank has a fuel line coming directly out of its bottom.
  • There is a retaining clip on the line to tighten it.
  • Take up a pair of pliers and just remove that retaining clip or slide that down the fuel line.
  • Now go ahead and loosen up this fuel line.
  • Make sure you have something underneath to catch all the gas that’s going to drain out.
  • You can tilt your snowmobile on one side to extract the remaining gas.
  • And once all the gas is drained out of your machine make sure you replace that fuel line and retaining clip.
  • Start the Polaris snowmobile engine and let it run. It will shut off on its own when out of gas completely.

Method # 3 – Using a Siphon Pump

If you want to drain the gas from your Polaris snowmobile, you can do so by using a siphon pump. This is a more quick and easy way to get the job done and you won’t have to worry about spilling gas all over the place.

Here’s how to siphon gas from the Polaris snowblower

  • Make sure that your snowmobile is at even level, turned off and the engine is cool.
  • Place an empty container to catch the residual gas near your snowmobile.
  • Open or unscrew the fuel tank cap.
  • Take the siphon pump and place the intake tube into the gas tank.
  • Then put the other end of the tube into the container.
  • Squeeze the siphon pump with your hand until the gas tank is empty.
  • This procedure has its limitations so not all the gas from the snow blower is extracted.
  • To completely empty the gas tank, start the Polaris snowmobile engine and let it run. It will shut off on its own when out of gas.

Do You Need to Drain Polaris snowmobile?

If you are a newbie using a Polaris snowmobile, you must know that it’s important to drain the gas and oil from your snowmobile before storing it for the summer. This is because gas and oil can deteriorate over time, and if they’re left in the snowmobile, they can cause damage to the engine and parts.

Precautions To Take Before Draining Gas From Polaris snowmobile 

Before you begin the process of draining the gas out of your snowmobile, there are a few safety measures you should take.

  1. Make sure that the snowmobile is turned off and that the engine is cool.
  2. Disconnect the spark plug wire from the spark plug. This will prevent the engine from accidentally starting while you are working on it.
  3. Make sure that the Polaris snowmobile is in a well-ventilated area. It will allow any fumes that are present to dissipate quickly.
  4. Wear gloves and eye protection while you are working to protect yourself from any potential injuries.
  5. Finally, make sure that you have a clean container to catch the gas as you drain it out.

Related Questions – How To Drain Gas From Polaris snowmobile

What happens if you leave gas in a snowmobile?

If you leave gas in a snowmobile over the summer, the gas will deteriorate and turn into varnish. This can clog up the carburetor and prevent the snowmobile from starting in the winter. To avoid this, make sure to empty the gas tank before storing the snowmobile for the summer.

How do you start a Polaris snowmobile that has been sitting?

If you have a Polaris snowmobile that has been sitting for a while, you may be wondering how to get it started.

The good news is that starting a snowmobile is not that different from starting any other type of engine.

  • First, check the oil level and add oil if needed.
  • Then, check the gas tank to make sure there is enough fuel.
  • Next, open the choke all the way and pull the starter cord.
  • Once the engine is running, close the choke and allow the Polaris snowmobile to warm up for a few minutes.

Once the snowmobile is warmed up, you should be able to start clearing snow. If you have any trouble starting the snowmobile, consult the owner’s manual for troubleshooting tips.

Leave a Comment