New Carburetor Only Runs On Choke – Here is How To Fix It

Do you have a hard time keeping your engine running after replacing the old carburetor with a new one? Will the new carburetor only run on choke?

If your small engine only runs on a choke, it means there is too much air or insufficient fuel in the new carburetor. Dirty and old gas also causes problems in the carburetor due to its changed chemical composition.

Moreover, a leak in the air system, a faulty spark plug, and a bad fuel system restricting fuel flow also leads to a new carburetor only running on choke. Running any engine on a full choke can cause severe damage to the engine and needs urgent repair.

Now that you completely understand why your new carburetor will only run on choke, how can you fix it?

Continue reading to discover everything you need to do to get your machine up and start doing what it is meant to do.

New Carburetor Only Runs On Choke

If you have replaced your carburetor recently and still your machine does not runs, the first thing you think will be: Why is this happening and what can you do to fix it?

Don’t worry. This is a common problem with many engines, and it can be frustrating if you’re not sure what to do. But the good news is that there are a few things you can do to get your engine running again

In this article, we’ll give you some tips on how to troubleshoot an engine and carburetor that only runs on full choke. We’ll also share some information on how to prevent this problem from happening in the future.

But first, we will assume you want to know about carburetors and choke and their function on the engines. Skip this part if you want to fix the problem quickly.

What Is Carburetor

A carburetor is an essential component in an internal combustion engine. It is responsible for mixing fuel and air in the right proportions and supplying the mixture to the engine.

In fact, the carburetor regulates the amount of air and fuel that are mixed together, which affects the speed and power of the engine. The carb also helps to control the engine’s idle speed.

What is a Choke and how its function on the engine?

In all small engines, a choke is a valve to restrict the airflow into an engine in order to make it easier to start.

When the engine is cold, the choke is used to partially or fully block the flow of air. This increases the fuel concentration in the combustion chamber thus leading to a quick and easy engine start-up.

This is designed especially for cold conditions when your small engine won’t start easily. Once the engine is warm, the choke is no longer needed and can be turned off.

New Carburetor Only Runs On Choke: Causes and Solutions

If your engine won’t start or won’t stay running when you pull off the choke or your new carburetor only runs on the choke, there are several reasons and causes.

Blocked Carburetor

A blocked carburetor requires the use of a choke in any engine to immediately start it. As the carburetor is responsible for mixing the air and fuel in the engine if it gets blocked, it can cause the engine to run lean or don’t run at all, meaning that there is not enough fuel being mixed with the air.

This can cause the engine to stall, and the recently installed carburetor will need to be choked to get it started again. But choking is not the best option all the time, you should clean the carb. Before going to clean this thing, it is important to know why even the new carburetor gets blocked.

A new carburetor can become blocked for a number of reasons.

They typically get blocked due to old or stale gas, which reduces the newly installed carburetor efficiency and causes engine problems.

When gas sits for too long, it begins to break down and form deposits on the carburetor. This old gas can become stale and turn into varnish, which can also clog up the carburetor’s jets and passages.

If there is somehow water in the gas, it can also cause deposits to form.

Moreover, moisture can condense in the carburetor, which can lead to rust and corrosion.

Note: Gas is considered damaging for caburetor and engine if it is more than 5-6 months old. Therefore, never use old gas in your small engines, if you dont want your machines to end up running on just choke.

Another common reason maybe is if the engine or the machine is left outside in the cold for an extended period of time. The cold weather can cause the carburetor to freeze, which can then block the fuel line and prevent the engine from starting.

Another reason a new carb only runs on a choke is if there is debris in the fuel line. This can happen if the fuel is of low quality, or the fuel line is not cleaned regularly. The debris can clog the new carburetor and prevent the engine from starting.

How To Clean A Clogged Carburetor On Engine

Cleaning a carb without removing it can be a difficult task, but it is possible with the proper tools and techniques. Here, we will give you a step-by-step guide on how to clean a carburetor without removing it. First, you will need to gather the following supplies:

  1. A carburetor cleaner
  2. A wire brush
  3. Pointy nose pliers
  4. A set of sockets and wrenches
  5. A rag

Once you have gathered the necessary supplies, follow these steps to clean your carburetor:

1. Disable the engine: To disable the engine, disconnect the negative battery terminal.

2. Remove the air filter: Locate the air filter housing and remove the cover. Then, remove the filter itself.

3. Spray carburetor cleaner: Next, spray carburetor cleaner into the carburetor throat. Be sure to coat all of the parts well.

4. Allow the cleaner to soak: Allow the cleaner to soak for 10-15 minutes.

5. Scrub the carburetor: Use the wire brush to scrub the carburetor clean. Pay special attention to the jets and passages.

6. Reassemble and test the engine: Once everything is clean, reassemble the air filter housing and reconnect the negative battery terminal. Start the engine and test it out. If it runs smoothly, you have done a great job!

However, if it is still not running instead on a full choke, you have to disembark the carburetor and clean it thoroughly. 

Tips to Prevent Carburetor Blockage

How To Avoid a Blocked Carburetor? A blocked carburetor can be a serious problem for any engine, and it is important to know how to avoid this problem. There are a few things you can do to avoid a blocked carburetor.

  • First, make sure you regularly clean your engine. This will help to remove any build-up of dirt or debris that could eventually lead to a blockage.
  • Second, be sure to use fresh fuel. Old fuel can oftentimes be the cause of carburetor issues.
  • And finally, if you’re not using your engine for a while, be sure to cover it up to protect it from the elements.
Other Keypoints:

Don’t Use older Gas in your small engines – not more than 5 months old fuel.

What happens if you leave the choke on too long?

If you leave the choke on too long, your car will eventually stall. This is because the choke is restricting the airflow to the engine, and without enough air, the engine can’t run. So if you find yourself in this situation, just turn the choke off and start your engine again.

Leave a Comment