Small Engine Only Runs On Choke – Simple Fixes To Get Going Again

Do you have a hard time keeping your Small Engine running? Will your Small Engine only run on full choke?

If the small engine only runs on a choke, it means there is too much air or insufficient fuel in the carburetor. Dirty and old gas causes problems in the small engine carburetor due to its changed chemical composition.

Moreover, a leak in the air system, a faulty spark plug, and a bad fuel system restricting fuel flow also lead to an engine only running on choke. Running an engine on a full choke can cause severe damage to the engine and needs urgent repair.

Now that you completely understand why your small engine will only run on choke, how can you fix it? Continue reading to discover everything you need to do to get your engine up and blowing again.

Small Engine Only Runs On Choke

If your small engine only runs on choke, Of course, the first thing you think will be: Why is this happening and what can you do to fix it?

Don’t worry. This is a common problem with small engines, and it can be frustrating if you’re not sure what to do. But the good news is that there are a few things you can do to get your engine running smoothly again.

In this article, we’ll give you some tips on how to troubleshoot a small engine that only runs on full choke. We’ll also share some information on how to prevent this problem from happening in the future.

But first, we will assume you want to know about carburetors and choke and their function on small engines. Skip this part if you want to fix the problem quickly.

What Is Carburetor

A carburetor is an essential component in an internal combustion engine. It is responsible for mixing fuel and air in the right proportions and supplying the mixture to the engine.

In fact, the carburetor regulates the amount of air and fuel that are mixed together, which affects the speed and power of the engine. The carb also helps to control the engine’s idle speed.

What is a Choke and how its function on the engine?

A choke is a valve in the small engine to restricts the airflow into the carburetor of the engine in order to make it easier to start.

When the engine is cold, the choke is used to partially or fully block the flow of air. This increases the fuel concentration in the combustion chamber thus leading to a quick and easy engine start-up.

This is designed especially for cold conditions when your small engine won’t start easily. Once the engine is warm, the choke is no longer needed and can be turned off.

Small Engine Won’t Stay Running: Causes and Solutions

If your small engine won’t start or won’t stay running when you pull off the choke, there are several reasons and causes.

Blocked Carburetor

A blocked carburetor can result in the use of a choke in a small engine to immediately start it. As the carburetor is responsible for mixing the air and fuel in the engine if it gets blocked, it can cause the engine to run lean or don’t run at all, meaning that there is not enough fuel being mixed with the air.

This can cause the engine to stall and it will need to be choked to get it started again. But choking is not the best option all the time, you should clean the carb. Before going to clean this thing, it is important to know why the carb gets blocked.

A carburetor can become blocked for a number of reasons.

They typically get blocked due to old or stale gas, which reduces the carburetor efficiency and causes engine problems.

When gas sits for too long, it begins to break down and form deposits on the carburetor. This old gas can become stale and turn into varnish, which can also clog up the carburetor’s jets and passages.

If there is somehow water in the gas, it can also cause deposits to form.

Moreover, moisture can condense in the carburetor, which can lead to rust and corrosion.

Note: Gas is considered damaging for caburetor and engine if it is more than 5-6 months old. Therefore, never use old gas in your small engines, if you dont want your machines to end up running on just choke.

Another common reason maybe is if the Small Engine is left outside in the cold for an extended period of time. The cold weather can cause the carburetor to freeze, which can then block the fuel line and prevent the Small Engine from starting.

Another reason a carb can become blocked is if there is debris in the fuel line. This can happen if the fuel is of low quality, or the fuel line is not cleaned regularly. The debris can clog the carb and prevent the engine from starting.

How To Clean A Clogged Carburetor On Small Engine

Cleaning a carb without removing it can be a difficult task, but it is possible with the proper tools and techniques. Here, we will give you a step-by-step guide on how to clean a carburetor without removing it. First, you will need to gather the following supplies:

  1. A carburetor cleaner
  2. A wire brush
  3. Pointy nose pliers
  4. A set of sockets and wrenches
  5. A rag

Once you have gathered the necessary supplies, follow these steps to clean your carburetor:

1. Disable the engine: To disable the engine, disconnect the negative battery terminal.

2. Remove the air filter: Locate the air filter housing and remove the cover. Then, remove the filter itself.

3. Spray carburetor cleaner: Next, spray carburetor cleaner into the carburetor throat. Be sure to coat all of the parts well.

4. Allow the cleaner to soak: Allow the cleaner to soak for 10-15 minutes.

5. Scrub the carburetor: Use the wire brush to scrub the carburetor clean. Pay special attention to the jets and passages.

6. Reassemble and test the Small Engine: Once everything is clean, reassemble the air filter housing and reconnect the negative battery terminal. Start the engine and test it out. If it runs smoothly, you have done a great job!

However, if it is still not running instead on a full choke, you have to disembark the carb and clean it thoroughly. 

Tips to Prevent Carburetor Blockage

How To Avoid a Blocked Carburetor? A blocked carburetor can be a serious problem for any engine, especially a Small Engine, and it is important to know how to avoid this problem. There are a few things you can do to avoid a blocked carburetor.

  • First, make sure you regularly clean your engine. This will help to remove any build-up of dirt or debris that could eventually lead to a blockage.
  • Second, be sure to use fresh fuel. Old fuel can oftentimes be the cause of carburetor issues.
  • And finally, if you’re not using your engine for a while, be sure to cover it up to protect it from the elements.

Other Keypoints:

Don’t Use older Gas in small engines– not more than 5 months old fuel.

FAQs – Small Engine Only Runs On Choke

Is it OK to run a Small Engine with the choke on?

If you are running a Small Engine with the choke on, it is not advisable to do so for an extended period of time. The choke is designed to help the engine start by restricting the amount of air that flows into the carburetor. Once the engine is running, the choke should be turned off to allow the engine to operate at peak efficiency.

Running a Small Engine with the choke on for too long can cause the engine to overheat and could ultimately lead to engine damage. So if you’re running a Small Engine , be sure to turn the choke off once the engine is up and running.

Why is my Engine cranking but not starting?

If your Small Engine is cranking but not starting, there are a few potential issues that could be the cause.

  • First, check the batteries. If they’re dead, you’ll need to replace them.
  • The next thing to check is the fuel level and make sure there is enough gas to run the engine. If the fuel level is low, fill it up and try again.
  • If the Engine still doesn’t start, the next step is to check the oil level. Low oil can cause the engine to seize, so make sure there is enough oil in the Small Engine before trying to start it again.
  • If the Engine is still cranking but not starting, it’s possible that the spark plugs are dirty or need to be replaced. You can clean the spark plugs yourself or take them to a professional to have them replaced.
  • Finally, if none of these solutions work, it’s possible that the engine is damaged and will need to be repaired or replaced.

What happens if you drive with the choke on?

If you drive with the choke on, it will eventually cause your engine to stall. The choke is designed to help your engine start by supplying it with extra fuel. However, once your engine is running, you don’t need the choke on. If you keep it on, it will flood your engine with too much fuel and cause it to stall.

What happens if you drive a motorbike with the choke on?

If you drive with the choke on, your bike will consume more fuel than it otherwise would. This is because the choke restricts the amount of air that can enter the engine, which causes the engine to run richer and use more fuel. Additionally, driving with the choke on can damage the motorbike’s engine over time.

Why does my engine start but not stay running?

If your engine starts but then dies shortly after, there are a few possible causes. It could be that the spark plug is fouled and needs to be replaced, the air filter is dirty and needs to be cleaned, or the carburetor is flooded and needs to be drained.

It’s also possible that the issue is with the fuel itself. If the gas in the tank is old, it may have gone bad and is causing the engine to misfire. Try draining the gas tank and refilling it with fresh fuel. If that doesn’t solve the problem, then you’ll need to take a closer look at the carburetor.

Related Articles:

New Carburetor Only Runs On Choke – Here is How To Fix It

Generator Only Runs On Choke – Quick Fix In A Few Minutes

Leave a Comment