Toro Snowblower Only Runs On Choke – What To do?

Do you have a hard time keeping your Toro Snowblower running and it only runs on full choke?



If Toro Snowblower only runs on a choke, it means there is too much air or insufficient fuel in the carburetor. Dirty and old gas causes problems in the snow blower’s carburetor due to its changed chemical composition.

Moreover, a leak in the air system, a faulty spark plug, and a bad fuel system restricting fuel flow also lead to an engine only running on choke. Running a snow blower on a full choke can cause severe damage to the engine and needs urgent repair.

Now that you completely understand why your Toro Snowblower will only run on choke, how can you fix it? Continue reading to discover everything you need to do to get your Snowblower up and blowing snow again.

Toro Snow Blower Only Runs On Choke

The leaves are falling and the snow is on its way, which means it’s time to get your snow blower out of the garage and get ready for action. But what if you had just done this exercise to find out that your Toro snowblower only runs on choke?

Of course, the first thing you think will be: Why is this happening and what can you do to fix it?

Don’t worry. This is a common problem with snow blower engines, and it can be frustrating if you’re not sure what to do. But the good news is that there are a few things you can do to get your snow blower running smoothly again.

In this article, we’ll give you some tips on how to troubleshoot a Toro snow blower that only runs on full choke. We’ll also share some information on how to prevent this problem from happening in the future.

But first, we will assume you want to know about carburetors and choke and their function on the snow blower. Skip this part if you want to fix the problem quickly.

What Is Carburetor?

Toro Snow Blower Only Runs On Choke - Snow blower wont start - won't stay start

A carburetor is an essential component in an internal combustion engine. It is responsible for mixing fuel and air in the right proportions and supplying the mixture to the engine.

In fact, the carburetor regulates the amount of air and fuel that are mixed together, which affects the speed and power of the engine. The carb also helps to control the engine’s idle speed.

What is a Choke and how its function on the engine?

Like all small engines, a choke is a valve in the snowblower to restrict the airflow into an engine in order to make it easier to start.

When the engine is cold, the choke is used to partially or fully block the flow of air. This increases the fuel concentration in the combustion chamber thus leading to a quick and easy engine start-up.

This is designed especially for cold conditions when your small engine won’t start easily. Once the engine is warm, the choke is no longer needed and can be turned off.

Reasons Why Toro Snowblower Only Runs On Choke

Air Leak

An air leak in the fuel system can cause the Toro snowblower to stall without the choke. This is because the engine needs a certain amount of air and fuel mixture to operate properly. If there is an air leak, the engine will be getting extra air and won’t start properly.

So check the fuel lines for possible leakages if your Toro snow blower is running only on choke.

Using the Wrong Fuel

If you’re using the wrong fuel in your Toro snowblower engine, it’s likely the reason why your machine is sputtering and stalling. This is another reason causing your snowblower to run on a choke. The wrong fuel can cause all sorts of problems, from clogged fuel lines to gummed-up carburetors.

This practice of using the wrong fuel makes the engine run lean, which in turn causes the carburetor to run richer. Ultimately you have to choke the oxygen supply to the engine which causes the engine to run hotter, which can lead to engine damage.

So what to do now? If you have used the wrong fuel type then it’s best to immediately empty the fuel tank and clean it with a Carb cleaner.

Therefore, it’s important to use the right fuel in your snowblower to keep it running smoothly. Always use the specified fuel type suggested by your manufacturer.

If your snowblower is struggling to start, you must examine what type of fuel you have been using.

Also remember: Using the wrong fuel in your snowblower is not covered by a warranty, so it’s important to get it fixed as soon as possible to avoid any expensive repairs.

How To Tell If Gas Is Old

If you haven’t remembered when you last refilled your snow blower’s gas tank, you can guess the age of the gas by observing its appearance and smell.

  1. The dark color means it is going old.
  2. If it got an intense sour smell it is likely to be gone bad.
  3. If it has a thicker texture it needs to be disposed of.

Note: If you are not sure whether or not the gas is old, it is always best to err on the side of caution and dispose of it properly. You can contact your local hazardous waste disposal facility to find out the best way to get rid of old gas.

Toro Snowblower Won’t Stay Running: Causes and Solutions

If your Toro snowblower engine won’t start or won’t stay running when you pull off the choke, there are several reasons and causes.

Blocked Carburetor

A blocked carburetor can result in the use of a choke in a snow blower to immediately start it. As the carburetor is responsible for mixing the air and fuel in the engine if it gets blocked, it can cause the engine to run lean or don’t run at all, meaning that there is not enough fuel being mixed with the air.

This can cause the engine to stall, and the Toro snow blower will need to be choked to get it started again. But choking is not the best option every time, you should clean the carb as early as possible. Before going to clean this thing, it is important to know why the carb gets blocked.

A carburetor can become blocked for a number of reasons.

They typically get blocked due to old or stale gas, which reduces the carburetor efficiency and causes engine problems.

When gas sits for too long, it begins to break down and form deposits on the carburetor. This old gas can become stale and turn into varnish, which can also clog up the carburetor’s jets and passages.

If there is somehow water in the gas, it can also make deposits in the system.

Moreover, moisture can condense in the carburetor, which can lead to rust and corrosion.

Note: Gas is considered damaging for caburetor and engine if it is more than 5-6 months old. Therefore, never use old gas in your small engines, if you dont want your machines to end up running on just choke.

Another common reason may be is if the snow blower is left outside in the cold for an extended period of time. The cold weather can cause the carburetor to freeze, which can then block the fuel line and prevent the snow blower from starting.

Another reason a carb can become blocked is if there is debris in the fuel line. This can happen if the fuel is of low quality, or the fuel line is not cleaned regularly. The debris can clog the carb and prevent the snow blower from starting.

How To Clean A Clogged Carburetor On Toro SnowBlower

Toro Snow Blower Only Runs On Choke

Cleaning a Toro Snowblower carb without removing it can be a difficult task, but it is possible with the proper tools and techniques.

Here, we will give you a step-by-step guide on how to clean a carburetor without removing it. First, you will need to gather the following supplies:

  1. A carburetor cleaner
  2. A wire brush
  3. Pointy nose pliers
  4. A set of sockets and wrenches
  5. A rag

Once you have gathered the necessary supplies, follow these steps to clean your carburetor:

1. Disable the engine: To disable the engine, Switch off the engine and disconnect the negative battery terminal.

2. Remove the air filter: Locate the air filter housing and remove the cover. Then, remove the filter itself.

3. Spray carb cleaner: Next, spray carburetor cleaner into the carburetor throat. Be sure to spray all of the parts well. Also, spray it in the fuel line.

Toro Snow Blower Only Runs On Choke 1

4. Allow the cleaner to soak: Allow the cleaner to soak for 10-15 minutes.

5. Scrub the carburetor: Use the wire brush to scrub the carburetor clean. Pay special attention to the jets and passages.

6. Reassemble and test the snow blower: Once everything is clean, reassemble the air filter housing and reconnect the negative battery terminal. Start Toro’s engine and test it out. If it runs smoothly, you have done a great job!

However, if your machine is still not running instead of on a full choke, you have to disembark the carb and clean it thoroughly. 

Moreover, if you want complete freshness to your Toro Snowblower engine, you can also order a new carburetor.

Tips to Prevent Carburetor Blockage

How To Avoid a Blocked Carburetor? A blocked carburetor can be a serious problem for any engine, especially a snowblower, and it is important to know how to avoid this problem. There are a few things you can do to avoid a blocked carburetor.

  1. First, make sure you regularly clean your engine. This will help to remove any build-up of dirt or debris that could eventually lead to a blockage.
  2. Be sure to use fresh fuel. Old fuel can oftentimes be the cause of carburetor issues. Always remove residual gas before storing your snowblower.
  3. And finally, if you’re not using your engine for a while, be sure to cover it up to protect it from the elements.
Other Keypoints:

Don’t Use older Gas in Toro Snowblower – not more than 5 months old fuel.

Also Read:

Toro Snow blower Drive Problems – Fixes To Help You Get Moving

Leave a Comment