What Is Cat6 Cable Used For

Do you know that how the people across the globe are connected to each other? How do they contact each other in this time of technological advancement? How the trading is done?

And how the greeting, sorrows, and other social contents are share? The answer to all the above questions is “Internet”.

The internet providing companies get the internet from the main source through cables. These cables are called optical fiber cables and these cables are available in different categories.

The name of the cables is cat5 cable, cat5e cable,cat6 cable,cat7 cable cat8 cable.

What is the internet?

A typical answer to this question is that the internet is a vast crisscross, matrix, or network that is providing a bridge between two or more people. It is used to share their feelings and daily talks.

The up to the marked benefit of this connection is that you can access the website anywhere and at any time. 

Let’s come to the original material which is under discussion that what is cat 6 cable? A cable that is used as an Ethernet cable to connect a pc or smart device through a router using the internet.

These are used according to the category defined by the EIA and TIA.

EIA (Electronic Industries Association):

This association is an American grade and trading institution that is composed in the thought of union of trade for the electronics maker in the whole United States.

An association that sets the standards to make sure that the equipment from a different manufacturer is according to the market harmony and identical.

TIA (Telecommunication Industry Association):

ANSI (American National Standards Institute) has developed this association voluntarily, they set the harmony or agreed on base standards for the industry.

They have a wide variety of products related to information and communication. Approximately 400 companies are registered under them.

Basic characteristics of CAT 6 cable:

Cat 6 is basically a category of cable used in networking or to connect a pc with the internet cable. The Cat 6 cable supports approximately 10 gigabytes per second in terms of theoretical.

Bandwidth capacity:

The capacity of the bandwidth of this cable is about 250 Megahertz.  The average DTR (Data transfer speed) of this cable is not more than 1000 megabytes per second.

Best match with older versions:

You can have called this cable a sixth-generation cable. The covered cables are twisted internally for Ethernet cable work. These category 6 cables are truly well-matched with the recently olden cat5 and with cat5e cables.

Use Rj45 connectors:

The connector used to connect with this cat 6 cable is the same as the older version carries, the standard connector of Rj-45.

CAT 6 cable performance:

When you place or locate the Ethernet cable, you have to maintain a specified length of the cable. The reason to maintain the length is if you use the length of cable than the specified length, you may have to face low internet speed or data loss.

Specified length:

The dedicated length for cat 6 cable is up to 100 meters that are 328 feet. But the standard length used for cat 6 cable is 90 meters which are 295 feet.

Can be added more:

This 90 meter is used in a solid cable straight-line connection and more than 5 meters or 16 feet is added for wall jack and patch paneling.

You can use shielded cable up to 90 meters’ length while the unshielded cable that is also a type of cat6, you can use this cable only for the length of 55 meters.

Easy steps to make cat6 cable like a professional:

It is not necessary that the available sizes of cable give you the best compatibility according to your need because it is not possible to make cable ready to use in every size and shape.  So here are some easy steps to make the cat 6 cables on your own.

The process is not lengthy but technically sound:

This all process is somehow not lengthy but it is a logical approach and the person who is making the cable is well sound of the technological aspects.
The easy steps to make your cable are here.

Steps to make Cat6 cable:

1. Bought the cable from the market according to your use, the cut length of the cable must be 2 or 3 feet more than your need.

2. Cut the cable as per your need. You can easily have slid the cable if the snag-less boots are needed.

3. The main and the most intense part is the striping or pealing of cable. Peel the cable up to 1 inch with the stripping tool.

Then remove the stripped part of the cover that might not contain the cable pieces.
Just back twist the cover of the cable make the cables straight as much as you can, must be near 90 degrees.

4. Now align all the cables at 90 degrees in the case of cat 6 cables. Cut all of the aligned cables approximately half-inch from the start of the cable.

One thing to keep in mind is that don’t crush the ends of the wire because then the joint in the jack will not durable.

5. Make sure that all the cables are properly cut and in a line, then pick a new connector because these connectors are only for one-time use.

Load the all-aligned cables in the connector and press it through the Ethernet cable maker or Ethernet cable plier.

6. Check the punched cable through the meter is working properly or not. If the meter readings are correct then the cables are connected properly.

7. Use the cable where you want to make the connection. You can now connect your pc or laptop to the internet, make a networking system, you can connect your CCTV cameras or Security camera supports POE(Power On Ethernet).

Read our article on How to Connect CCTV Camera to Computer.

Cat 6 cable compatibility:

The Cat 6 and the Cat 5e cables, both have the same procedure to get ready and both use the same end chunks. You can plug both cables into the same port.

But when we talk about their capability then we can categorize in differences their manufacturing material and methods used to make the cable an end product.

Both the cables use the same Rj45 connector and you can use easily both cables in the Ethernet jack of your pc or laptop as well as with the PoE appliances and other devices that support Ethernet cabling.

Read our most popular article on What is the Best PoE Security Camera System.

Common applications where you can use Cat6 cable or Ethernet cable:

The Cat 6 cables are mostly using for networking all over the world.
The installers feel confident and trusty when they use cat 6 cables along with the main networking cable, optical fiber cable.

No doubt, this cable is somehow pricey than cat5e but the cat6 is highly authentic if you are using it for a long-distance up to 100 meters.

This cable also gives you a better performance when you installed this on PoE devices. This is much popular than any other cable using for networking now a day.

The data loss or loss in internet speed is less than other cables. This is the only reason that people use cat 6 cables in the homes and offices.

Different scenarios, Different types:

If you talk about the types of cat 6 cable according to the difference in specifications then there are two types of cat cable.  The types are shielded and unshielded cable, solid and stranded cable.

The above-mentioned classification was in terms of that how much copper conductors are in a single pair. According to the cable jack rating the types are CM, CMR, and CMP.

The choice of the type of cat 6 cable is according to the need and purpose you are looking for.

Difference of Unshielded and Shielded Cat6 cable:

When we talk about getting the high-speed without the intrusion of EMI which stands for electromagnetic induction, the cable used for this purpose is a shielded cat 6 cable. 

These cat 6 shielded cables are constricted in a thick layer of foil.

The unshielded cables or you may call them UTP Ethernet cat 6 cables are buckled with each other to lessen the clamor or hubbub and the unwanted movement of signals in the communication channel.

The shielded cables are mostly used in data centers where the networking systems used 10Gbase-T network properties. The 10Gbe is more reactive to electromagnetic induction.

The difference which occurs in the use of a cable that the unshielded cables are mostly used for computer and between the walls.
The shielded cables are used where the intensive or highly influential cables are available outdoor or inside the walls.

How to make the right choice between solid and stranded Cat6 cable:

Solid cables are a good electricity conductor but this cable only uses a single or 1 in number electrical conductor.

The stranded cat6 Ethernet cable uses a spate of wires that are made up of copper and which are crumpled with each other.

The solid cable is not much flexible as the stranded cable is safe against breakage and, you can easily use it on the top of the desk and can round the cable anywhere.

As mentioned earlier, that solid cable is not much flexible as stranded cat6 Ethernet cable but it is highly durable. So you can use this solid cat6 Ethernet cable outdoor and inside the walls without any worry.

Owing to high attenuation, the length of the stranded cable always keeps short because using this cable lessens the chances of interruption of attenuation in the whole system.

It is just that in every 6 meters of length, use the stranded patches Ethernet cable. Always use stranded cables for megaprojects. Use the stranded patch cables to make a connection bridge between the network interface cards that are NICs in short.

Also, use the stranded patch cable to make a connection between the patch panels, wall-mounted racks, big data hubs, and many more.

What is CM, CMR, and CMP:

CM stands for “Communication multipurpose”. These cat6 Ethernet cables are generally used inside residential buildings or in single-story multipurpose or commercial buildings. These cables are used mostly for general purposes.

CMR stands for “Communication multipurpose riser”. These cables are also called riser-rated cables. CMR cables are mostly used in vertical panels as the name of the cable describes well, riser.

These cables are resistant to the spreading of fire under the floors and in the vertical shafts.

CMP stands for “Communication multipurpose plenum”. These cables are also called plenum-rated cables.

The jacket for that cable is made with a material that is highly against the spreading of flames and not makes many smoke and virulent gases when burnt.

You can use these cables for full benefit in the ducts or air ducts that are connected for the purposes of heating of room or any particular area as well as for ventilation purposes and also used in raised floors and the drop roofs or false ceiling.

Final verdict:

Personal perceptions had a great influence on decision making but this is our responsibility to tells you the best option. The CMR cables are mostly used in residential buildings because they are not designed for commercial buildings.

Leave a Comment